We use cookies to improve your experience on our site. By continuing to use our site, you accept our use of cookies. Learn more.

Skip to content
  • Support
  • Leitner Premium Plus Setup with Desk Phone

Leitner Premium Plus Desk Phone Setup

  1. Plug the power into the back of the Leitner base
  2. Connect the Leitner connector cord (green tape) into the green TEL port
  3. Flip to the bottom of the base and ensure the left switch is set to RHL and the slider is set to 1. (Set the slider to 4 instead of 1 on Cisco phones if your Cisco phone has a Headset port in step 4)
  4. Check the back of your phone for a Headset port. If it has one, plug the Leitner connector cord into that port, and you’re done
  5. No Headset port? Unplug the handheld receiver curly cord from the Handset port. Plug the Leitner connector cord in its place
  6. Plug the receiver curly cord into the far right port on the back of the Leitner base, then you're done!
  7. Don't forget to put the headset back on the base and let the headset charge for four hours!

Compare headsets

Select 2 or 3 items to compare

Select first item to compare

Select second item to compare

Select third item to compare

Compare

Have a Headset Advisor call you for sales or support